Home | Electronic Design
Download the digital version of the November-December edition of Electronic Design.
What’s The Difference Between Watts And Volt-Amperes?
2012年5月2日 · The Watt is the SI unit of power -- Volts times Amperes in direct-current systems, but when dealing with alternating current, if you introduce a reactive (non-resistive) load, Volts and Amps are ...
Differences Between NRZ, NRZI, and Manchester Serial Encoding ...
2024年7月1日 · I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers ...
What’s the Difference Between Axial- and Radial-Flux Electric …
2023年10月25日 · That’s understandable since axial-flux motors and radial-flux motors are common classes of electric motors. Both convert electrical energy into mechanical energy, but they differ substantially ...
FDMA, TDMA, CDMA, OFDMA, and SDMA: Key Differences and …
2013年1月22日 · The best example of this is the cable television system. The medium is a single coax cable that is used to broadcast hundreds of channels of video/audio programming to homes.
Understanding EMI Filters: The Bare Essentials - Electronic Design
2021年7月19日 · 1. This graph shows a conducted differential-mode EMI measurement in a design without an EMI filter. The height of the fundamental (orange and purple) that’s above the target limit line (red ...
What’s the Difference Between PNP and NPN Transistors?
2022年10月28日 · The basic principle of any BJT is to control the current of a third terminal with the voltage between the other two terminals. The principle of operation of NPNs and PNPs is exactly the same.
3 Ways to Reduce Power-Supply Noise | Electronic Design
2024年7月18日 · In addition to the natural output capacitance of the power supply, you might add a series inductor and another filter capacitor to further reduce output noise (Fig. 3).The inductor passes dc ...
Understanding ESD And EOS Failures In Semiconductor Devices
2014年2月6日 · The ESD protection circuit is designed to turn on in response to an ESD event, clamping the voltage at the bond pad. Failure analysis of field return devices can assist the design and development ...
Power Management 101: Power MOSFET Charactertics
2009年5月15日 · What is the threshold voltage of a power MOSFET? Threshold voltage, Vgs(th), is the minimum gate-source electrode bias required to form a conducting channel between the source and the drain regions.